‘5’ Simple Steps to Get Started With MagicStick

September 4, 2017 by puja sharma
< Back
You are here:

The new MagicStick One is powered by Intel’s 14nm Cherry Trail Processor and is pre-loaded with Windows 10 Pro (trial) and Android 5.1. It also supports Ubuntu and all variants of Linux. The device comes with very attractive specifications and can be used for both personal and professional use-cases.

Before we start with the 5 Step Guide to Set-up, let’s just check out the list of components that comes as a part of add-ons with MagicStick One box:

  • MagicStick One
  • Power Adapter
  • USB Cable
  • HDMI (male to female) Cable
  • MagicStick Box
  • User’s Manual
  • MagicStick One Quick Set-up Guide

Here’s a 5 Step simple guide to get you started with using MagicStick One device:

Connect Power Adapter and USB Cable

Connect Power Adapter and Connector pin first and plug it to the power point.

Connect the USB port end of the cable with Power Adapter and Red colored micro USB cable (on the other end) to 5V Power Port on device.

Connect HDMI 2.0 port with HDMI Display Unit (TV, Projector, Laptop, etc.)

Remove the cap on top of the device and connect the HDMI port directly to any HDMI display unit. Alternately, you can connect the device and display unit using HDMI (male to female) cable provided in accessories to reach difficult corners and small spaces.

Connect Keyboard or Mouse to USB Port

You can connect both Keyboard and Mouse to the device by connecting with two different USB 3.0 ports simultaneously.

Press START on MagicStick One Device

Press the Start button provided on the side of the device. The device will respond by turning on the blue light as an indicator at the bottom.

Select OS

After pressing start button, the device will start and show OS selection menu for 10 seconds. You can select the OS for your preference by using keyboard, mouse or mobile app.